Improvement of numerical modeling of the fire reaction of solid materials. Application to fire safety engineering studies
ABG-124909 | Sujet de Thèse | |
03/07/2024 | Contrat doctoral |
- Sciences de l’ingénieur
- Génie des procédés
Description du sujet
the objective of the PhD is to improve the FDS code so that it can better describe the reaction processes to fire that take place. This work is then based on experimental tests at different scales of work, then correlated, to the development and validation of the numerical code:
- To determine experimentally the thermo-physical properties of the solid materials studied and necessary as input data of the numerical models.
Identification of the data required for the numerical models for the planned calculation code (SDS), quantification of the number of parameters and the intended operating range (combustion, pyrolysis).
Determination within Pprime in thermogravimetric analyzer (TGA), in differential scanning calorimetry (DSC) and in cone calorimeter, of the thermo-physical properties of the studied materials: thermal conductivity, specific heat and density (k, ρ, Cp), reaction enthalpies and kinetic parameters from mass loss, mass loss rate, temperature and energy data.
- Experimentally characterize thermal decomposition, ignition and flame propagation processes, identify key processes.
From small and medium scale tests, the processes of thermal decomposition (loss of mass, rate of mass loss and temperature in the solid) and combustion (ignition time, rate of heat release, temperatures in the gases) are characterized for different experimental conditions implemented. On a larger scale, in radiant panel (Pprime), the processes of ignition and flame propagation are studied, whether they are co-current or counter-current, vertical or horizontal. This analysis is complemented by large-scale tests conducted at Efectis' facilities.
- Develop numerical models to improve prediction capability.
From the previous phases, pyrolysis models are developed and validated on an increasing scale, by comparison of experimental and numerical results: determination and optimization of kinetic mechanisms, verification and validation of design codes by material and scale. Once the pyrolysis model is validated at all scales, it is used by the partners to better describe the flame propagation processes, with an optimization of the description of heat transfers, flame/wall interaction, combustion kinetics, etc. The digital simulation expertise of both partners is thus mobilized.
Prise de fonction :
Nature du financement
Précisions sur le financement
Présentation établissement et labo d'accueil
The present PhD is part of the LabCom (joint laboratory) ANR "Perf-ISI/ Performance in Fire Safety Engineering" which associates the Heterogeneous Combustion team of the Pprime Institute (UPR 3346 CNRS) and Efectis France.
The Heterogeneous Combustion team of the Pprime Institute (UPR 3346 CNRS) – University of Poitiers – ISAE-ENSMA, located in Poitiers, has been developing for several years a recognized experimental and numerical expertise in the field of fire safety. Works concerning different applications, such as construction and housing, industrial and transport.
Efectis France is the largest laboratory in France in terms of fire resistance tests (evaluation of the fire performance of products, systems or structures), and fire safety engineering. Within Efectis France, the Research and Innovation Department allows the realization of development studies for its customers, in order to support them in their fire problems. This department is also involved in the training process, through the supervision of many engineering internships and PhD in connection with the universities and school of the fire community.
Intitulé du doctorat
Pays d'obtention du doctorat
Etablissement délivrant le doctorat
Ecole doctorale
Profil du candidat
Diplomas: Master or Engineer in Science
Skills: It is desired that the doctoral student possess strong scientific skills in the scientific fields encountered during combustion and fire processes: heat transfer, aeraulic, thermodynamic, chemical kinetics.
Skills in the field of combustion and fire safety are very important.
It is required to know how to work independently and in a team, to have analytical skills and to be a force of proposals. Finally, the ability to write and present in English is expected.
Vous avez déjà un compte ?
Nouvel utilisateur ?
Vous souhaitez recevoir nos infolettres ?
Découvrez nos adhérents
- Institut de Radioprotection et de Sureté Nucléaire - IRSN - Siège
- ANRT
- MabDesign
- SUEZ
- Groupe AFNOR - Association française de normalisation
- Nokia Bell Labs France
- ADEME
- MabDesign
- Institut Sup'biotech de Paris
- Généthon
- Laboratoire National de Métrologie et d'Essais - LNE
- Tecknowmetrix
- ONERA - The French Aerospace Lab
- CESI
- TotalEnergies
- PhDOOC
- CASDEN
- Aérocentre, Pôle d'excellence régional
- Ifremer
-
EmploiCDIRef. ABG124941Corteria PharmaceuticalsMassy-Palaiseau - Ile-de-France - France
Jeune Docteur, Chercheur en Biologie Cellulaire & Moléculaire (H/F)
BiologieNiveau d'expérience indifférent -
EmploiCDDRef. ABG125071KTHStockholm - Suède
ERC-funded postdoc position on the detection of gas-phase organic radicals, KTH, Stockholm, Sweden
Chimie - Physique - Sciences de l’ingénieurNiveau d'expérience indifférent -
EmploiCDIRef. ABG123642Laboratoire des Courses Hippiques (GIE LCH)Verrières-le-Buisson - Ile-de-France - France
Chargé(e) de Recherche et Innovation (H/F) / Senior Scientist Research & Innovation (M/F)
Chimie - BiochimieConfirmé